HR380
Outfront Commercial Flail Mower
Robust Müthing® flail technology is joined by a powerful, Stage V compliant engine to make an outfront for the frontline. This road worthy mower is proven in cutting areas that are mown less frequently and has low-maintenance features, fewer moving parts and smart onboard diagnostics.
The Council Operators at City of Hoorn, Holland, Use Ransomes Flail Mowers and The Residents Can See the Difference
Watch
Video
Key Features
Sheet
Premium Müthing® Finish for Grass Cut Less Frequently
Powerful, Clean, Green Stage V 37.5 HP Engine
Versatile, Comfortable & Manoeuvrable
Safe On-the-Road & Easily Adaptable to Rotary
Technical Specs
Choose a Section
Key Attributes
Flail Units
Traction, Brakes & Speed
Weight & Dimensions
Key Attributes
Flail Units
Traction, Brakes & Speed
Weight & Dimensions
| Cutting Width | 1.60 m (63") |
| Height of Cut | 20 - 65 mm (0.8 - 2.6") |
| Cutting Capacity | 1.60 m (63") cuts 1.73 ha/hr x 12 km/h (4.27 acre/hr x 7.5 mph) |
| Flail Units | Single out-front heavy duty Müthing flail |
| Fuel Capacity | 47 L (12.4 gal) |
| Engine | Kubota 28 kW (37.5 hp) Diesel |
| Emissions | EU Stage V - (EPA Tier 4 Final) Compliant |
| Operator Station | Protected operator position with a high specification mechanical suspension seat as standard and multiple storage options |
| Safety & Road Options | Amber warning beacon; Halogen / LED Road lights & mirrors; Air ride suspension seat; Rear storage panniers; Sealed operator storage pod;, Tilt Sensor Technology slope monitoring system. |
| Certification | BSI approved: ISO 9001, ISO 14001, ISO 45001. Manufactured In UK. |
| Warranty | 2 Years |
| Number and Size | 1 x 1600 mm (63") front flail unit, 300 mm (12.5") working diameter |
| Blade and Cutting Unit Construction | "M" Type heavy duty Carbide Flails with shark fin shredding bar for optimum spread and mulching of clippings., High strength structural steel hood. Spring steel projectile guards. Bolt on carbide wear skids |
| Cutting Unit Controls | Lift / lower fingertip control mounted on adjustable operator armrest. |
| Traction System | Hydrostatic, automatic on-demand cross-flow 4 wheel drive in forward and on demand in reverse |
| Cutting Unit Drive | Hydraulic motor with mechanical dual V belt final drive |
| Hydraulic System | 42 L (11.1 gal) capacity regulated with side by side cooler |
| Service Braking | Dynamic braking through Hydrostatic traction system |
| Parking Brakes | Zero-maintenance electro-hydraulic wet parking brakes |
| Steering | Hydraulic power steering with adjustable tilt steering wheel |
| Mowing Speed | 18 km/h (11.2 mph) maximum |
| Transport Speed | 25 km/h (15 mph) |
| Weight | 1336 kg (2,945 lbs) with 1.60 m (63") Müthing flail |
| Length | 3.45 m (136") with Müthing flail |
| Height | 2.15 m (85") ROPS up // 1.48 m (58") ROPS down |
| Wheel Base | 1.48 m (58") |
| Transport Width | 1.8 m (71") with Müthing® flail |
| Working Width | 1.8 m (71") with 1.60 m (63") with Müthing® flail units down |
Specifications, while correct at time of publishing, may change without notice. Requires Ultra Low Sulphur Diesel. Cutting Capacity 10% allowance for overlap.
